Order number
S16300C
Availability
On request
Documents
Description
- MEASNET calibrated anemometer
- One-piece rotor anemometer head
- Low threshold speed
- Short distance constant
- Negligible overspeeding
- Angular response independent of wind speed
- Symmetrical geometry
- No external power source
- Individually calibrated compliant with IEC 61400-12-1
Specifications
| Characteristics | |
|---|---|
| Calibration | Each anemometer individually calibrated compliant with IEC 61400-12-1. |
| Measurement range | 0 … 75m/s |
| Slope | 0.620m |
| Offset | 0.21m/s |
| Starting threshold | < 0.3m/s |
| Distance constant | λ0= 1.81 ± 0.04m |
| Switching chararacteristic | |
| Signal Type | NPN open collector, frequency proportional to wind speed |
| Duty cycle | 45 … 55% |
| Max. switching voltage | 30V |
| Max. recommended switching current | 10mA |
| Output resistance | 60Ω |
| Operating temperature range | -40 … +60°C |
| Exterior materials | Anodized aluminum, Stainless steel and GRP |
| Weight | 0.36kg |
| Overall height | 282mm |
| Swept diameter of rotor | 188mm |
| Manufacturer | WindSensor |
| Accessories | Module M83570 or M83200 (pull-up resistor 5.1kΩ required) |
Dimensional drawing
Sensor connection diagram
| Sensor | Ammonit Wire Color | Meteo-40 Counter |
Supply Sensor |
|---|---|---|---|
| Signal, high | white | Counter CNT, 6k8 (Switch: 5 V via 6k8 to CNT, Pull-up resistor) | |
| Signal, low | black | Main Ground |
Connect the shield logger-sided to Ground (GND)
Cable type: LiYCY 2 (3) x 0.25mm²
